|
| |
|
| Stiebel Eltron DHC-E 8 Electric Tankless Water Heater | Wheeler Rex Replacement Glass Cutter Chain #690012 |
 Stiebel Eltron DHC-E 8 Electric Tankless Water Heater The Stiebel Eltron DHC-E 8 Electric Tankless Water Heater. Control temperature simply by setting a dial . Set the knob on the front cover and enjoy water temperatures between 86°F (30°C) and 125°F (52°C). Change the desired temperature at anytime. No purchase of a remote selector control is necessary. Advanced microprocessor technology ensures that the water temperature never deviates from the set point. No scalding. The electronic control system in the DHC-E does not allow the water temperature to go above 125°F (52°C), which eliminates the possibility that scalding may occur. On the other hand, 125°F (52°C) water is sufficiently hot for most uses. Simple design of plumbing system. There is no need for a T & P valve, drain or mixing valve. The design of the hot water plumbing system gets very simple and straight forward due to the advances introduced with the DHC-E. Stiebel Eltron DHC-E 8 Electric Tankless Water Heater sleek design fits in anywhere due to its small dimensions and attractive housing the DHC-E can be left unconcealed in many applications. Seismic-proof construction. DHC-E is a tankless water heater system, and is thereby not subject to seismic code. There is no need for preventative construction, as required when using a bulky water storage heating system. Take the cover off. We have done our homework. As an international leader in the tankless electric water heating industry, STIEBEL ELTRON is proud to have pioneered this technology. Superior, reliable performance. The DHC-E has two temperature sensors and one flow sensor which feed their readings into the unit's proprietary microprocessor control. Three heating elements are engaged in stages, achieving the temperature you desire. The DHC-E continually monitors the water temperature it produces. DHC-E Tankless Electric Water Heaters deliver instant hot water. Stiebel Eltron DHC-E 8 Electric Tankless Water Heater Specifications: • Phase 1, 208/240 V, 5.4/7.2 KiloWatts, 26/30V • Min. required circuit breaker size is 30/40 Amps • Recommended wire size is AWG Copper 10/8 • Maximum temperature increase above ambient water temp. is 49 /65 @ 0.75 GPM, 37 /49 @ 1.00 GPM, or 25 /33 @ 1.50 GPM. • Minimum Water flow to activate unit is 0.45 GPM/1.7 l/min. • Pressure loss in unit is 1.46 PSI/0.1 bar • Working pressure is 150 PSI/10 bar • Water connections 1/2" NPT
|
 The Wheeler Rex #690012 Replacement Glass Cutter Chain • For 1/2" thru 3/4" Glass Tube Cutter #69012 • 3" in Length • 12 Pins
|
|
|
| Stiebel Eltron DHC-E 10 Electric Tankless Water Heater | Wheeler Rex 7300 Super Snipper Blade |
Stiebel Eltron DHC-E 10 Electric Tankless Water Heater The Stiebel Eltron DHC-E 10 Electric Tankless Water Heater. Control temperature simply by setting a dial . Set the knob on the front cover and enjoy water temperatures between 86°F (30°C) and 125°F (52°C). Change the desired temperature at anytime. No purchase of a remote selector control is necessary. Advanced microprocessor technology ensures that the water temperature never deviates from the set point. No scalding. The electronic control system in the DHC-E does not allow the water temperature to go above 125°F (52°C), which eliminates the possibility that scalding may occur. On the other hand, 125°F (52°C) water is sufficiently hot for most uses. Simple design of plumbing system. There is no need for a T & P valve, drain or mixing valve. The design of the hot water plumbing system gets very simple and straight forward due to the advances introduced with the DHC-E. Stiebel Eltron DHC-E 10 Electric Tankless Water Heater sleek design fits in anywhere due to its small dimensions and attractive housing the DHC-E can be left unconcealed in many applications. Seismic-proof construction. DHC-E is a tankless water heater system, and is thereby not subject to seismic code. There is no need for preventative construction, as required when using a bulky water storage heating system. Take the cover off. We have done our homework. As an international leader in the tankless electric water heating industry, STIEBEL ELTRON is proud to have pioneered this technology. Superior, reliable performance. The DHC-E has two temperature sensors and one flow sensor which feed their readings into the unit's proprietary microprocessor control. Three heating elements are engaged in stages, achieving the temperature you desire. The DHC-E continually monitors the water temperature it produces. DHC-E Tankless Electric Water Heaters deliver instant hot water. Stiebel Eltron DHC-E 10 Electric Tankless Water Heater Specifications: • Phase 1, 208/240 V, 7.2/9.6 KiloWatts, 35/40V • Min. required circuit breaker size is 40/50 Amps • Recommended wire size is AWG Copper 8 • Maximum temperature increase above ambient water temp. is 65 /87 @ 0.75 GPM, 49 /65 @ 1.00 GPM, or 33 /44 @ 1.50 GPM. • Minimum Water flow to activate unit is 0.45 GPM/1.7 l/min. • Pressure loss in unit is 1.46 PSI/0.1 bar • Working pressure is 150 PSI/10 bar • Water connections 1/2" NPT
|
 Wheeler Rex 7300 Super Snipper Blade • Wheeler Rex 7300 Super Snipper Blade is For Wheeler Rex Super Snipper 7290.
|
|
|
| Wheeler Rex 700669 Replacement Drive Screw & Adjusting Block Assembly | Wheeler Rex 276693 Water Supply Tank for Pipemaster |
 The Wheeler Rex 700669 Replacement Drive Screw & Adjusting Block Assembly. • Wheeler Rex 700669 Replacement Drive Screw & Adjusting Block Assembly is For Wheeler Ratchet Pipe Cutters 490 & 491.
|
 The Wheeler Rex 276693 Water Supply Tank Wheeler Rex 276693 Water Supply Tank for Pipemaster Specifications: • 4 Gallon Tank. • For The Pipemasters 4624 & 4628.
|
|
|
| Eemax EX3012T "Thermostatic" Electric Tankless Water Heater | Eemax EX3512T "Thermostatic" Electric Tankless Water Heater |
 The Eemax EX3012T "Thermostatic" Electric Tankless Water Heater. To serve as a booster, eliminating long pipe runs, boosters for dishwashers and sanitation. Applications where precise temperature control is essential such as schools, hospitals and laboratories. Meets ANSI Z358.1 tepid water requirements for emergency eyewash. Anti-scale protection. Recommended for hot or cold water feed, microprocessor temperature control for accurate temperature. Fitted with 1/2" copper pipe compression fittings. Standard range 100 to 140°F. Turn on .7 GPM, max 2 GPM. Eemax EX3012T "Thermostatic" Electric Tankless Water Heater Applications: • Boosters (to 180° F) • Metering and sensor faucet compatible • Low volume shower handset (.7 - 2 GPM) • Schools/Hospitals/Nursing Homes/Laboratories • Eliminate wait for hot water, long pipe runs • Maintains accurate temperature continuously +/- 0.5°F Eemax EX3012T "Thermostatic" Electric Tankless Water Heater Features: • Fully Adjustable Temperature Range between 100-140°F. Special settings of higher or lower range available upon request. • Eliminate costly mixing valves. • On Demand Hot Water - no delay. • Continuous Hot Water - no storage capacity to run out. • Reduces Installation Cost - no T & P relief valve needed (check local codes). • Easy Installation - only one cold water line need be brought to installation - integral 1/2" compression fittings on bottom (no sweat connections). • Cut Energy Waste -flow switch activates heater only on demand (no standby heat loss). • Thermostatic control reduces wide temperature fluctuation. • Prevents Legionella Bacteria Growth. • Meets ANSI Z358.1 Tepid Water Requirements. • Anti-scald Protection. • Designed for Durability - constructed of high strength reinforced "ENGINEERING PLASTIC". • Ni Chrome Element - a unique, patented flow path ensures optimum heat transfer and extended element life. • Compact Size - dimensions 10.75"x5.25"x2.125"; weight 3 lbs. • Reduces calcification. • Space Saving Installation - under sink, point-of-use. • Field Serviceable Element - replaceable cartridge element. • Complies with handicap requirements. Eemax EX3012T "Thermostatic" Electric Tankless Water Heater Specifications: • Volts 120V • KW 3.0kW • Amps 25A • Rise at 0.5 GPM 41°F • Rise at 0.75 GPM 27°F • Wire Size AWG 10 • Dimensions 10.75" x 5.25" x 2.125" • Weight 3 lbs • Element - Replaceable cartridge insert • Connections 1/2" compression Eemax EX3012T "Thermostatic" Electric Tankless Water Heater Thermostat Accuracy: • Thermostatic board maintains +/-0.5°F accuracy. • Achieves full, pre-selected outlet temperature within 10 seconds after activation. • Maintains consistent temperature. * Units can be used at 208V with 25% reduced output. * The voltage, amperage, and circuit breaker specifications must be met for this heater to function. Please make sure all requirements are met before purchasing this heater. Manufacturer's start up procedures must be observed.
|
The Eemax EX3512T "Thermostatic" Electric Tankless Water Heater. To serve as a booster, eliminating long pipe runs, boosters for dishwashers and sanitation. Applications where precise temperature control is essential such as schools, hospitals and laboratories. Meets ANSI Z358.1 tepid water requirements for emergency eyewash. Anti-scale protection. Recommended for hot or cold water feed, microprocessor temperature control for accurate temperature. Fitted with 1/2" copper pipe compression fittings. Standard range 100 to 140°F. Turn on .7 GPM, max 2 GPM. Eemax EX3512T "Thermostatic" Electric Tankless Water Heater Applications: • Boosters (to 180° F) • Metering and sensor faucet compatible • Low volume shower handset (.7 - 2 GPM) • Schools/Hospitals/Nursing Homes/Laboratories • Eliminate wait for hot water, long pipe runs • Maintains accurate temperature continuously +/- 0.5°F Eemax EX3512T "Thermostatic" Electric Tankless Water Heater Features: • Fully Adjustable Temperature Range between 100-140°F. Special settings of higher or lower range available upon request. • Eliminate costly mixing valves. • On Demand Hot Water - no delay. • Continuous Hot Water - no storage capacity to run out. • Reduces Installation Cost - no T & P relief valve needed (check local codes). • Easy Installation - only one cold water line need be brought to installation - integral 1/2" compression fittings on bottom (no sweat connections). • Cut Energy Waste -flow switch activates heater only on demand (no standby heat loss). • Thermostatic control reduces wide temperature fluctuation. • Prevents Legionella Bacteria Growth. • Meets ANSI Z358.1 Tepid Water Requirements. • Anti-scald Protection. • Designed for Durability - constructed of high strength reinforced "ENGINEERING PLASTIC". • Ni Chrome Element - a unique, patented flow path ensures optimum heat transfer and extended element life. • Compact Size - dimensions 10.75"x5.25"x2.125"; weight 3 lbs. • Reduces calcification. • Space Saving Installation - under sink, point-of-use. • Field Serviceable Element - replaceable cartridge element. • Complies with handicap requirements. Eemax EX3512T "Thermostatic" Electric Tankless Water Heater Specifications: • Volts 120V • KW 3.5kW • Amps 29A • Rise at 0.5 GPM 48°F • Rise at 0.75 GPM 32°F • Wire Size AWG 10 • Dimensions 10.75" x 5.25" x 2.125" • Weight 3 lbs • Element - Replaceable cartridge insert • Connections: 1/2" compression Eemax EX3512T "Thermostatic" Electric Tankless Water Heater Thermostat Accuracy: • Thermostatic board maintains +/-0.5°F accuracy. • Achieves full, pre-selected outlet temperature within 10 seconds after activation. • Maintains consistent temperature. * Units can be used at 208V with 25% reduced output. * The voltage, amperage, and circuit breaker specifications must be met for this heater to function. Please make sure all requirements are met before purchasing this heater. Manufacturer's start up procedures must be observed.
|
|
|
| General Wire PH-DR-C Drain-Rooter PH Basic Unit with 3/8" x 35' Cable and HECS Cutter Set | Eemax EX55T "Thermostatic" Electric Tankless Water Heater |
 General Wire PH-DR-C Drain-Rooter PH Basic Unit with 3/8" x 35' Cable and HECS Cutter Set The General Wire PH-DR-C Drain-Rooter Includes: Drain-Rooter PH Basic Unit Including Power Cable Feed, 4' Guide Hose, Drum, Variable Speed Motor with Reversing Switch, Water-Proof Air Foot Switch, Plastic Cartridge, Leather Gloves, 3/8" x 35' Cable, and HECS Cutter Set. General Wire PH-DR-C Drain-Rooter Features: Equipped with a variable speed power cable feed and variable speed motor, the Drain-Rooter PH makes drain cleaning jobs cleaner and easier. The Drain-Rooter PH feeds and retrieves the cable at up to 16 feet per minute. A four-foot guide hose eliminates cable whipping, dirty fixtures and messy floors. And the drum speed can be varied by changing the pressure on the foot pedal, making it easier to thread the boring head through strainers or crossbars. The Drain-Rooter PH is a real labor-saver on long jobs or when working in a cramped area where the weight of the machine could get burdensome. It can be operated in both horizontal and vertical positions to get closer to the drain opening. General Wire PH-DR-C Drain-Rooter Specifications: • Weight: 22 lbs. (10 kg) (without cable) • Dimensions: 22" deep x 13-1/2" wide x 15" high (without hose) (56 cm x 34 cm x 38 cm) • Drum: Heavy gauge stamped aluminum with inner drum to prevent cable tangling. • Capacity: 50 ft. of 1/4" or 5/16" cable; 35 ft. of 3/8" cable. All cables are left hand wound and reinforced with a wire rope center. • Power Cable Feed: Drives 1/4", 5/16" and 3/8" cables. • Cutter Set: Arrow Head, Boring Gimlet, Down Head Boring Gimlet, 1-1/4" Side Cutter Blade, Flexible Arrow Head Cutter • Motor: All ball-bearing, double insulated, reversible motor with speed control; 0-400 rpm, 230 and 240 volts available. • Foot Pedal: Pneumatic foot pedal controls variable speed motor. Leaves operator's hands free to control cable.
|
The Eemax EX55T "Thermostatic" Electric Tankless Water Heater. To serve as a booster, eliminating long pipe runs, boosters for dishwashers and sanitation. Applications where precise temperature control is essential such as schools, hospitals and laboratories. Meets ANSI Z358.1 tepid water requirements for emergency eyewash. Anti-scald protection. Recommended for hot or cold water feed, microprocessor temperature control for accurate temperature. Fitted with 1/2" copper pipe compression fittings. Standard range 100 to 140°F. Turn on .7 GPM, max 2 GPM. Eemax EX55T "Thermostatic" Electric Tankless Water Heater Applications: • Boosters (to 180° F) • Metering and sensor faucet compatible • Low volume shower handset (.7 - 2 GPM) • Schools/Hospitals/Nursing Homes/Laboratories • Eliminate wait for hot water, long pipe runs • Maintains accurate temperature continuously +/- 0.5°F Eemax EX55T "Thermostatic" Electric Tankless Water Heater Features: • Fully Adjustable Temperature Range between 100-140°F. Special settings of higher or lower range available upon request. • Eliminate costly mixing valves. • On Demand Hot Water - no delay. • Continuous Hot Water - no storage capacity to run out. • Reduces Installation Cost - no T & P relief valve needed (check local codes). • Easy Installation - only one cold water line need be brought to installation - integral 1/2" compression fittings on bottom (no sweat connections). • Cut Energy Waste -flow switch activates heater only on demand (no standby heat loss). • Thermostatic control reduces wide temperature fluctuation. • Prevents Legionella Bacteria Growth. • Meets ANSI Z358.1 Tepid Water Requirements. • Anti-scald Protection. • Designed for Durability - constructed of high strength reinforced "ENGINEERING PLASTIC". • Ni Chrome Element - a unique, patented flow path ensures optimum heat transfer and extended element life. • Compact Size - dimensions 10.75"x5.25"x2.125"; weight 3 lbs. • Reduces calcification. • Space Saving Installation - under sink, point-of-use. • Field Serviceable Element - replaceable cartridge element. • Complies with handicap requirements. Eemax EX55T "Thermostatic" Electric Tankless Water Heater Specifications: • Volts 240V • KW 5.5kW • Amps 23A • Rise at 0.5 GPM 75°F • Rise at 0.75 GPM 50°F • Rise at 1.0 GPM 38°F • Rise at 1.5 GPM 25°F • Wire Size AWG 10 • Dimensions 10.75" x 5.25" x 2.125" • Weight 3 lbs • Element - Replaceable cartridge insert • Connections: 1/2" compression Eemax EX55T "Thermostatic" Electric Tankless Water Heater Thermostat Accuracy: • Thermostatic board maintains +/-0.5°F accuracy. • Achieves full, pre-selected outlet temperature within 10 seconds after activation. • Maintains consistent temperature. * Units can be used at 208V with 25% reduced output. * The voltage, amperage, and circuit breaker specifications must be met for this heater to function. Please make sure all requirements are met before purchasing this heater. Manufacturer's start up procedures must be observed.
|
|
|
| |
|
|
|
